Screen filter 4" flanged DN100 with hooks closing and nylon mesh filter

Details:

• Water flow: 72 m³/h ; 20 lt/sec
• Filtering area: 2350 cm²
• 3 hooks closing
• Available nylon mesh filters: 50, 80, 120, 150 mesh
• Body length: 500 mm 
• Body diameter: 194 mm 
• Purge thread: 3/4" male
• IN/OUT inlets: 4" flanged DN100
• Pressure: max 8 bar
• Gaskets in nitrile rubber

Screen filters advantages:

Screen filters are often used as a safety feature of an installation. All dirt particles above a certain size are captured. Their purpose is twofold: to signal a problem in the upstream part of the installation, while protecting the downstream part of the installation.

L'AGREN filters can filter from 300 to 100 micron particles depending on nylon mesh filter used. Screen filters are often installed after hydrocyclone or sand media filters to remove very small particles that other filters can't filter.

Mantainance:

When the pressure differential between the two manometers is above 1 bar you need to purge the filter opening the 3/4" purge valve.