Hydrocyclone sand separator filter 2" male for irrigation
Hydrocyclone sand separator filter 2" male for irrigation
Hydrocyclone sand separator filter 2" male in galvanized steel
Hydrocyclone sand separator filter 2" male in galvanized steel
Hydrocyclone sand separator filter 2" male in galvanized steel
Hydrocyclone sand separator filter 2" male for...
Hydrocyclone sand separator filter 2" male for...
Hydrocyclone sand separator filter 2" male in galvanized steel
Hydrocyclone sand separator filter 2" male in galvanized steel
Hydrocyclone sand separator filter 2" male in galvanized steel

Hydrocyclone sand separator filter 2" male for irrigation

Last items in stock
€329.00
Tax included

L'AGREN MINI hydrocyclone sand separator filter is used for separating sand and other solid particles from the water coming from wells, rivers or lakes.

  • Inlets: 2" male threads
  • Pressure: max 10 bar
  • Body filter in hot deep galvanized steel
  • Water flow: 18 m³/h ; 5 lt/sec
  • Separates up to 90% of particles with granulometry higher than 75 μ.

You might also like

Shipping costs

Free shipping to Germany, Austria, France, Netherlands and Belgium for all hydrocyclones up to 2" and many others filters

 

iFUNCTION AND FEATURES

Why buy a sand separator? The sand or other solid particles present in well water can reduce the efficiency of the irrigation system equipment by plugging and clogging sprinklers, drip emitters, valves, and spray nozzles. 

Why buy L'AGREN ones? Differently from other brands, the L'AGREN hydrocyclones are more robust, reliable and with a longer life because they are not just painted but they are built with 3mm hot galvanized steel. 

Due to its simple structure, it is more economic and easy to use from the other sand separators. L’Agren hydrocyclons causes minimum pressure loss in filtration systems. 

TIP: If your water pressure is equal or higher than 2 bars you can buy an hydrocyclone with the same diameter (thread) of your pipes. Otherwise, we suggest you to buy an hydrocyclone with a thread just one size smaller than your pipes. For example if you 1" pipes and 1 bar and 1/2 of pressure we suggest you to buy a 3/4" threaded hydrocyclone.

How it works: Well water containing sand get into the unit tangentially inducing centrifugal action. This moves heavier particles to sides of the separator. Solids drop into collection chamber at the bottom and they are purged as required from it through a valve (not included).

The pressure and the flow determine the centrifugal speed. The higher the centrifugal strength, the higher will be the percentage of sand separated from the water.

This hydrocyclone separates up to 90% of particles with granulometry higher than 75 μ.

Size: A: 977mm; B: 815mm; C: 220mm; D: 370mm; E: 460mm. (see image below)

CICLONE-CICL2FMPN10-MISURE_ENG.jpg

Material
Galvanized steel
Thread
2" male
Pressure max
10 bar
L'AGREN S.R.L.
CICL2FMPN10
2 Reviews
Does what it says on the tin
This conical filter operates exactly as described. It has a handy manual discharge vent the only thing I would have preferred would be the inclusion of the connection joints and end caps.
By peter mills on 01/29/2021
consegna idrociclone
buonasera,
By Revnic Cecilia on 11/22/2020

You might also like

Customers who bought this product also bought:

Filtro a rete 1"1/2 M in acciaio zincato con calza nylon Filtro a rete 1"1/2 M in acciaio zincato con calza nylon 2
Last items in stock
Screen filters

Screen filter 2" M with nylon mesh filter small model

F20CFMOPN8
€245.00
The screen filter is typically used as a safety filter on water systems. It is usually installed after hydrocyclones to removes all small organic particles (300 to 100 micron). Water flow: 18 m³/h ; 5 lt/sec Filtering area: 858 cm² Pressure: max 8 bar Threads: 2" male Reliable and long lasting hot galvanized steel body
Hydrocyclone sand separator cyclone filter 1 "1/4 M Hydrocyclone sand separator cyclone filter 1 "1/4 M 2
Last items in stock
Hydrocyclones and sand separators

Hydrocyclone sand separator cyclone filter 1 "1/4 M

MCICL11/4FMPN10
€297.00
Hydrocyclone sand filter AGREN removes up to 90% of sand and particles greater than 75 μ present in the water of your system. Hydrocyclone flow rate: 9 m³ / h; 2.5 l / sec Connections: 1 "1/4 male threaded Sand collection tank: 1 "male thread Maximum operating pressure: 10 bar Resistant and long-lasting thanks to the hot-dip galvanized steel body
Product added to wishlist
Product added to compare.