Hydrocyclone sand filter AGREN...
Hydrocyclone sand filter AGREN removes up to 90% of sand and particles greater than 75 μ present in the water of your system.
Warning: Last items in stock!
Availability date: 12/04/2019
|Thread||1" 1/2 male|
To choose the right hydrocyclone, you need to know the pressure and flow rate of the system and the diameter of your pipe.
The hydrocyclone must be connected at the outlet to your pump.
If the pipe diameter is equal to the hydrocyclone, just use a 50x1 "1/2 female fitting. If the pipe diameter is greater than 1" 1/2 use a reduction.
The AGREN separator cyclone is suitable for both domestic , agricultural and industrial use and is essential to remove sand and other particles present in the water by separating up to 90% of sand and particles with a grain size greater than 75 μ ( to remove particles below this particle size it is recommended to connect a mesh filter at the outlet of the hydrocyclone )
Advantages for home use :
Advantages for irrigation :
the centrifugal force of the tangential inlet water separates the sand that slides on the filter wall, precipitating downwards where it is collected in the tank below. To empty the tank, simply open the drain valve. (valve not included).
The centrifugal speed depends on the flow rate and pressure. The greater the flow rate or pressure of the liquid, the greater the centrifugal force, the more efficient the separator will be.
Unlike the products of other brands which are simply painted, L'AGREN 's hydrocyclone sand trap is made entirely of hot-dip galvanized steel . This guarantees you a much greater reliability and duration over time.
Hot dip galvanizing compared to other protections :
|HOT GALVANIZING||OTHER METALLIC COATINGS||PAINTS|
|Bonded to steel||They do not bind to steel||Separate lining|
|Very long life||Variable durations||Variable durations|
|Electrochemically protects||Without electrochemical protection||Without electrochemical protection|
|Excellent damage resistance||Good damage resistance||Poor resistance to damage|
|Excellent abrasion resistance||Good abrasion resistance||Poor resistance to abrasion|
|Very easy to inspect||Sometimes difficult to inspect||Easy enough to inspect|
Dimensions: A = 820mm; B = 400mm; C = 168mm; D = 685mm. (see image below)
Filtro idrociclone dissabbiatore ciclone separatore di sabbia 1"1/2 M
Consono alle aspettative: buon prodotto