Horizontal by-pass fertilizer tank for fertigation 200 liters
Horizontal by-pass fertilizer tank for fertigation 200 liters
Horizontal by-pass fertilizer tank for fertigation 200 liters
Horizontal by-pass fertilizer tank for fertigation 200 liters
Horizontal by-pass fertilizer tank for...
Horizontal by-pass fertilizer tank for...
Horizontal by-pass fertilizer tank for...
Horizontal by-pass fertilizer tank for...

Horizontal by-pass fertilizer tank for fertigation 200 liters

In stock
€409.02

200 liters horizontal by-pass fertilizer tank for fertigation. 

  • Pressure: min 1,5 bar ; max 8 bar.
  • 2" window to check fertilizer level.
  • In - Out inlets: 1" F thread
  • Purge inlet: 1" F thread
  • Robust and reliable thanks to hot galvanized steel.
  • Gauge inlet: 1/4" F
  • Gaskets: EPDM
  • Bypass and gauge not included.

 

METHOD OF USE

Before inserting the fertilizer into the tank it is recommended to insert 40% of water to avoid corrosion of the internal walls of the tank.

For the by-pass to work correctly, the water entering the mixing tank must have a pressure of at least 1.5 bar.

At the end of each fertigation, in order to avoid corrosion, it is recommended to clean the inside of the tank with running water. After cleaning, to prolong the life of the tank, it may still be advisable to leave a modest quantity of water on the bottom to dilute any fertilizer residues.

HOW DOES IT WORK

The fertilizer mixer is able to dissolve and distribute fertilizer or pesticides directly into the root system of the crops in a very simple way. It is connected in parallel to the main line from which it exploits the pressure and flow. It does not require motors or electrical devices. A small pressure difference obtained through the use of valves creates a parallel flow inside the tank, agitating the contained liquid, facilitating the solution of the chemical fertilizer and introducing the mixture thus obtained into the irrigation system. The flow, amount of solution, or concentration of fertilizer can be controlled by a flow control valve. Mixer body in 3mm thick hot-dip galvanized steel. resistant to atmospheric agents.

Dimensions
cm 98 x 55 x H 98
Material
Galvanized steel
Hot galvanized steel
Inlet
1" Female
Pressure rating
min 1,5 ; max 8 bar
MIX200LTO
No reviews

Related products

Customers who bought this product also bought:

Product added to wishlist
Product added to compare.