No products
Product successfully added to your shopping cart
There are 0 items in your cart. There is 1 item in your cart.
Top sellers
Categories
Top sellers
Rain 156 1 "F 24V solenoid valve with flow control
In StockRain 156 1 "solenoid valve for irrigation complete with 24V AC solenoid and flow regulator1 ”(32 mm) female connections Compatible with all control units with transformer and 24V output It works in AC current: it does not matter which wire you connect to the common of the control unit Flow rate: from 30 to 150 liters / min ( higher water flow rate...
11,07 €
Rain AMICO PIÙ control unit for irrigation from the tap with batteries
In StockRain AMICO PIÙ control unit for tap irrigation with tap connection Ø 1 "F (2.5cm) or 3/4" F (1.9cm) Battery powered . For outdoor use, resistant to rain 3/4 "M outlet Easy programming : select start time, select duration, select frequencyProduct assembled and tested in Italy Instructions in the package
31,97 €
Female threaded nozzles for Rain S020 - NPS - PRO S SPRAY
In StockFemale threaded nozzles for sprays with arc range 0-360°. Supporting Rain S020 sprays, NPS, PRO S SPRAY.Available models: 8A 10A 12A 15A 17A Spray radius changes according to the selected nozzle (see details).
1,07 €
Rain AMICO PRO with solenoid valve 1 "F 9V external irrigation control unit with batteries
In StockBattery-powered irrigation unit for 1 zone irrigation model Rain AMICO PRO with 1 "Rain 150 solenoid valve and 9V DC solenoid Powered by AA batteries (duration about 1 year) Watertight model for outdoor or cockpit 1 "(32 mm) female solenoid valve connections Solenoid connection with connector 2 independent programs Up to 4 irrigations per day Instructions...
46,72 €
RAIN S020 1/2" static pop-up spray with 17A nozzle
In StockRAIN S020 1/2" static pop-up spray with 0-360° adjustable range 17A nozzle. Available with: height 5 cm. height 10 cm Radius 4.9 to 5.8m up to the adjustment range.
2,36 €
Rotor sprinkler 1/2" MINI PRO K-Rain with nozzles set
In StockThe MINI PRO Sprinkler is perfect for irrigating small lawn and landscape areas and saves water and money when used to replace spray heads. 1/2" inlet Adjustable 40 to 360 Degrees 5 nozzles included (one is already installed)
8,64 €
PTFE 0.19mm teflon thread seal tape
In StockPTFE teflon thread seal tape. 15 mt. long 19mm wide 0,20mm thick
0,97 €
Polypropylene 32x3/4" clamp saddle for irrigation systems
Out of stockPolypropylene 32x3/4" clamp saddle with reinforcing ring, flat gasket, galvanized bolts and nuts. Compatible with polyethylene and PVC pipes. Easy to install.
0,54 €
Pressure gauge radial connection 1/4" scale ranges 0 - 6/10/16 in stainless steel with glicerine
In StockPressure gauge with radial connection in stainless steel case, filled with glicerine. Radial connection Thread: 1/4" M Case size: 63mm Case in stainless steel Filled with glicerine
8,11 €
Rain 160 1"1/4 F electric valve with 24V solenoid and flow control
In StockRain 160 Plus 1"1/4 female electric valve, 24V solenoid with flow control for irrigation.Diameter and thread type: 1”1/4 female. Flow rate: min 75 l/m - max 275 l/min; Pressure drop: 0,2 - 0,69 bar. Size: L 10,6 cm ; H: 18,4 cm; P: 14,8 cm. Works with 24V irrigation controllers
21,97 €
Replacement nozzles for K-Rain MINI PRO sprinkler
In StockReplacement nozzles for K-Rain rotor sprinkler MINI PRO.
1,64 €
1" PVC nipple with O-RING anti-leak seal
Out of stock1" PVC nipple with O-RING (OR) anti-leak seal installed. Let you quickly install the nipple without using teflon tape on thread. Highly resistant PVC nipple. Resistant to UV rays. Corrosion free and rust free. Nominal pressure (PN) max 12 bar.
0,98 €
Rain C-DIAL 24 V Volt 4 zones indoor irrigation control unit
In StockRain C-DIAL 24V irrigation control unit for solenoid valves with 24V solenoids Compatible with all 24V AC solenoid valves Controls up to 4 solenoid valves ( 4 zones ) Indoor model Powered by external transformer (included) Equipped with buffer batteries (not included) so as not to lose the memory Rain sensor input Instructions in Italian in the package...
36,89 €
Rotor sprinkler 3/4" SUPER PRO K-Rain with nozzles
In StockDinamic rotor sprinkler K-Rain SUPER PRO 3/4" with replacement nozzles included. Inlet -3/4” Threaded NPT Arc Adjustment Range - 40 to 360 degrees Flow Range - 1.70 – 35.96 l./m. 0.10 - 2.16 m3/h. (.5 to 10.0 GPM) Pressure Rating – 2.00 to 4.83 bar. (30 to 70 PSI) Radius – 7.9 to 14.9m (28’ to 49’)
10,53 €
Continuous air release valve 1" for irrigation systems
In Stock1” Wade Rain Simple Action Plastic Air Release/Vacuum Relief Vent.Valve Action: Air Expulsion & Admission Inlet Connection: NPT MaleMechanism: Vent Air
10,08 €
Compression Fitting Male 32x1" adaptor PN16 for irrigation systems
Out of stockCompression Fitting MALE adaptor 32x1" in polypropilene - Nominal pressure (PN) 16 bar max. resistant to UV rays – Corrosion free and rust free. It has a black polypropylene body, blue polypropylene ring nut, acetal resin ring and OR, push patented system that permits the mounting of fitting without dismounting the ring.
1,64 €
Hydrocyclone sand separator cyclone filter 1 "M
AvailableHydrocyclone sand filter AGREN removes up to 90% of sand and particles greater than 75 μ present in the water of your system. Hydrocyclone flow rate: 7.2 m³ / h; 2 l / sec Connections: 1 "male threaded Sand collection tank: 1 "male thread Maximum operating pressure: 10 bar Resistant and long-lasting thanks to the hot-dip galvanized steel body
233,61 €
PTFE 0.10mm thick teflon thread seal tape
In StockPTFE teflon thread seal tape. 12 mt. long 12mm wide 0,10mm thick
0,38 €
Rain LATCHING SOLENOID 9 V for electric valves
In StockRain is proud to present the new range of solenoids valves equipped with an adaptor to open and close the valve manually with internal bleed. This improvement makes the opening and closing operation easier and safer. This changing interests also solenoid’s thread: it is now a3/4-20 UNF standard.
13,93 €
Rain C-DIAL indoor irrigation control unit 24 V Volt 6 zones
In StockRain C-DIAL 24V irrigation control unit for solenoid valves with 24V solenoids Compatible with all 24V AC solenoid valves Controls up to 6 solenoid valves ( 6 zones ) Indoor model Powered by external transformer (included) Equipped with buffer batteries (not included) so as not to lose the memory Rain sensor input Instructions in Italian in the package...
39,34 €
Rain C-DIAL irrigation control unit 9V 4 zones for indoor use with batteries
Out of stockRain C-DIAL 9V irrigation battery control unit for solenoid valves with bistable 9V DC solenoids . Compatible with all 9V DC solenoid valves Controls up to 4 different solenoid valves ( 4 zones ) Indoor model Powered by 4 AA batteries Equipped with buffer batteries (not included) so as not to lose the memory; Rain sensor input Instructions in Italian
36,44 €
Replacement nozzles for K-Rain SUPER PRO sprinkler
In StockReplacement nozzles for K-Rain rotor sprinklers .Fits K2 Smartset®, K2 Pro, K8000®, PROPLUS®, SUPERPRO®, & PROCOM®
2,87 €
Polypropylene 40x3/4" clamp saddle for irrigation systems
In StockPolypropylene 40x3/4" clamp saddle with reinforcing ring, flat gasket, galvanized bolts and nuts. Compatible with polyethylene and PVC pipes. Easy to install.
0,59 €
Reducing Nipple 3/4x1/2" in PP with O-RING anti-leak seal
Out of stock1" polypropylene reducing nipple 3/4x1/2" with O-RING (OR) anti-leak seal installed. Let you quickly install the fitting without using teflon tape on thread. Nominal pressure (PN) max 12 bar.
0,37 €
Polypropylene 25x3/4" clamp saddle for irrigation systems
In StockPolypropylene 25x3/4" clamp saddle with reinforcing ring, flat gasket, galvanized bolts and nuts. Compatible with polyethylene and PVC pipes. Easy to install.
0,45 €
Polypropylene 50x3/4" clamp saddle for irrigation systems
Out of stockPolypropylene 50x3/4" clamp saddle with reinforcing ring, flat gasket, galvanized bolts and nuts. Compatible with polyethylene and PVC pipes. Easy to install.
0,73 €
Hydrocyclone filter sand separator cyclone sand separator 3/4 "M
AvailableHydrocyclone sand filter AGREN removes up to 90% of sand and particles greater than 75 μ present in the water of your system. Hydrocyclone flow rate: 3.6 m³ / h; 1 lt / sec Connections: 3/4 "male threaded Sand collection tank: 1 "male thread Maximum operating pressure: 10 bar Resistant and long-lasting thanks to the hot-dip galvanized steel body
225,41 €
Hydrocyclone sand separator filter 2" male for irrigation
In stockL'AGREN MINI hydrocyclone sand separator filter is used for separating sand and other solid particles from the water coming from wells, rivers or lakes. Inlets: 2" male threads Pressure: max 10 bar Body filter in hot deep galvanized steel Water flow: 18 m³/h ; 5 lt/sec Separates up to 90% of particles with granulometry higher than 75 μ.
250,00 €
Purge valve 1" F-F for hydrocyclones
In StockPurge valve 1" F-F for hydrocyclones. This valve fits the hydrocyclones 1/2", 3/4", 1", 1"1/4, 1"1/2 models.
6,55 €
Support service
Lilibay staff is totally available to quickly answer to all your questions. Just fill out the contact form and we will be happy to help you.
Express delivery
All the orders will be generally dispatched within one business day from the time the order being received through an express courier that will delivery your items within 5 business days.
Secure payment
Lilibay is a secure site protected by SSL certificate. Your protection is certified by McAfee the first security partner, so you can securely pay on our site with credit card or use PayPal site to complete your payments.
