This solenoid valve with bistable solenoid is used for irrigation systems with battery controllers or with 9V DC output.

Connection with the control unit (see image)

1. Connect the black wire to the common output (c) of the control unit
2. Connect the red wire with the corresponding numbered output of the control unit, for example n ° 1.

CHARACTERISTICS OF THE RN 150 1 " :

• Connections: 1 "FF (see table for compatibility with hoses)
• Flow rate: min 20 l / m - max 90 l / m.
• Dimensions cm: L 7.1; H 11.4; P 9.2
• Pressure drop: 0.30 - 0.95 bar (see pressure drop table)
• Pressure: min 1 - max 12 bar
• Operation: normally closed

OTHER FEATURES :

• Material: PA 6 30% Glass fiber
• Self-cleaning steel dipstick
• Steel diaphragm spring with progressive action
• Manual opening under the solenoid
• CE certified solenoid, IP 68 9
• Solenoid installed: 9V DC
• 12 VDC compatible solenoids; 24 VDC;
• Temperature min 4 ° C max 70 ° C

We show below inch - mm conversion table

It is recommended to compare the diameter in inches with the dimension in mm of the PE / PVC pipe: