Water filters

Water filters

Irrigation filters used for water treatment, like: hydrocyclones, screen filters, disk filters, sand separators, quarzite filters, double chamber sand media filters.

Water filters There are 28 products.

Subcategories

  • Hydrocyclones and sand separators

    These hydrocyclones filters separate sand and other solid particles from the water coming from wells, rivers or lakes. This particles can reduce the efficiency of your irrigation system by plugging and clogging sprinklers, drip emitters, valves, and spray nozzles.

  • Screen filters

    Screen filters are often used as a safety feature of an installation. All dirt particles above a certain size are captured. Our filters can remove from 300 to 100 micron particles depending on nylon mesh filter used. Screen filters are often installed after hydrocyclone or sand media filters to remove very small particles that other filters can't handle.

  • Disk filters

    Disk filters for professional irrigation with galvanized steel body and printed steel cover. These filters are often used after an hydrocyclones filter to remove sand particles from dirty water coming from wells, rivers or lakes.

  • Dual chamber sand media filters

    Dual chamber sand media filters are designed for filtering water coming from lakes, rivers or pools containing organic materials such as lichen, alga. Dual chamber filters are often used for agricultural drip and micro irrigation systems, filtering of industrial cooling water and preliminary filtration of reverse osmosis systems.

  • Available

    Disk filter for professional irrigation flanged DN80 3". Body: galvanized steel Cover: printed steel Water flow: 10 lt/sec ; 36 m3/h Filter element: nylon disks cartridge with polypropylene support Closing system: 3 hooks Gaskets in nitrile rubber Suggested work pressure: 4 bar Manometers not included

    311,47 €
  • Shipped in 15 business days

    Disk filter for professional irrigation flanged DN100 4". Body: galvanized steel Cover: printed steel Water flow: 20 lt/sec ; 72 m3/h Filter element: nylon disks cartridge with polypropylene support Closing system: 3 hooks Gaskets in nitrile rubber Suggested work pressure: 4 bar Manometers non included

    409,83 €
  • Available

    Dual chamber sand media filter DN100 4" in galvanized steel with automatic backwash: Max pressure: 18 bar. Water flow: 40-80 m3/h. Total sand: 400Kg, 1-2mm sand Backwash kit included with: Galvanized backwash collector. Two three-way backwash valves. Backwash controller unit. Two 1" continuous air release valves. 3 stainless steel glicerine manometers....

    2 502,63 € 3 510,00 € -28.7%
    Reduced price!
  • Available

    Dual chamber sand media filter DN125 5" in galvanized steel with automatic backwash: Max pressure: 18 bar. Water flow: 70-110 m3/h. Total sand: 625Kg, 1-2mm sand. Backwash kit included with: Galvanized backwash collector. 2 three-way backwash valves. Backwash controller unit. Two 1" continuous air release valves. 3 stainless steel glicerine manometers....

    2 909,94 € 4 087,00 € -28.8%
    Reduced price!
  • In stock

    L'AGREN MINI hydrocyclone sand separator filter is used for separating sand and other solid particles from the water coming from wells, rivers or lakes. Inlets: 1/2" male threads Pressure: max 10 bar Body filter in hot deep galvanized steel Water flow: 1.8 m³/h ; 0.5 lt/sec Separates up to 90% of particles with granulometry higher than 75 μ. Size cm:...

    157,50 € 225,00 € -30%
    Reduced price!
  • Shipped in 7 business days

    L'AGREN MINI hydrocyclone sand separator filter is used for separating sand and other solid particles from the water coming from wells, rivers or lakes. Inlets: 3/4" male threads Pressure: max 10 bar Body filter in hot deep galvanized steel Water flow: 3.6 m³/h ; 1 lt/sec Separates up to 90% of particles with granulometry higher than 75 μ. Size cm: 82x40x16

    161,00 € 230,00 € -30%
    Reduced price!
  • Shipped in 7 business days
    (5/5) su 2 voto(i)

    L'AGREN MINI hydrocyclone sand separator filter is used for separating sand and other solid particles from the water coming from wells, rivers or lakes. Inlets: 1" male threads Pressure: max 10 bar Body filter in hot deep galvanized steel Water flow: 7.2 m³/h ; 2 lt/sec Separates up to 90% of particles with granulometry higher than 75 μ. Size cm: 82x40x16

    168,00 € 240,00 € -30%
    Reduced price!
  • In stock

    L'AGREN MINI hydrocyclone sand separator filter is used for separating sand and other solid particles from the water coming from wells, rivers or lakes. Inlets: 1"1/4 male threads Pressure: max 10 bar Body filter in hot deep galvanized steel Water flow: 9 m³/h ; 2.5 lt/sec Separates up to 90% of particles with granulometry higher than 75 μ. Size cm: 82x40x16

    175,00 € 250,00 € -30%
    Reduced price!
  • In stock
    (5/5) su 2 voto(i)

    L'AGREN MINI hydrocyclone sand separator filter is used for separating sand and other solid particles from the water coming from wells, rivers or lakes. Inlets: 1"1/2 male threads Pressure: max 10 bar Body filter in hot deep galvanized steel Water flow: 12.6 m³/h ; 3.5 lt/sec Separates up to 90% of particles with granulometry higher than 75 μ. Size cm:...

    182,00 € 260,00 € -30%
    Reduced price!
  • Shipped in 7 business days

    L'AGREN MINI hydrocyclone sand separator filter is used for separating sand and other solid particles from the water coming from wells, rivers or lakes. Inlets: 2" male threads Pressure: max 10 bar Body filter in hot deep galvanized steel Water flow: 18 m³/h ; 5 lt/sec Separates up to 90% of particles with granulometry higher than 75 μ.

    197,08 € 281,54 € -30%
    Reduced price!
  • In stock

    L'AGREN MINI hydrocyclone sand separator filter is used for separating sand and other solid particles from the water coming from wells, rivers or lakes. Inlets: 3" female threads Purge thread: 1" female Pressure: max 10 bar Body filter in hot deep galvanized steel Water flow: 36 m³/h ; 10 lt/sec Separates up to 90% of particles with granulometry higher...

    275,62 € 393,74 € -30%
    Reduced price!
  • In stock

    L'AGREN MINI hydrocyclone sand separator filter is used for separating sand and other solid particles from the water coming from wells, rivers or lakes. Inlets: 4" female threads Purge thread: 1" female Pressure: max 10 bar Body filter in hot deep galvanized steel Water flow: 72 m³/h ; 20 lt/sec Separates up to 90% of particles with granulometry higher...

    326,48 € 466,39 € -30%
    Reduced price!
  • In stock

    L'AGREN MINI hydrocyclone sand separator filter is used for separating sand and other solid particles from the water coming from wells, rivers or lakes. Inlets: flanged DN80 Purge thread: 1" female Pressure: max 10 bar Body filter in hot deep galvanized steel Water flow: 36 m³/h ; 10 lt/sec Separates up to 90% of particles with granulometry higher than 75 μ.

    275,62 € 393,74 € -30%
    Reduced price!
  • In stock

    L'AGREN MINI hydrocyclone sand separator filter is used for separating sand and other solid particles from the water coming from wells, rivers or lakes. Input and output inlets: flanged DN100 Purge inlet: 1" female thread Pressure: max 10 bar Body filter in hot deep galvanized steel Water flow: 72 m³/h ; 20 lt/sec Separates up to 90% of particles with...

    326,48 € 466,39 € -30%
    Reduced price!
  • In stock

    L'AGREN MINI hydrocyclone sand separator filter is used for separating sand and other solid particles from the water coming from wells, rivers or lakes. Input and output inlets: flanged DN125 Purge inlet: 1" female thread Pressure: max 10 bar Body filter in hot deep galvanized steel Water flow: 108 m³/h ; 30 lt/sec Separates up to 90% of particles with...

    361,48 € 516,39 € -30%
    Reduced price!
  • Available

    Dual chamber sand media filter 2" F in galvanized steel with automatic backwash: Max pressure: 18 bar Water flow: 10-30 m3/h. Total sand: 125Kg, 1-2mm sand Backwash kit included with: Galvanized backwash collector. Two three-way backwash valves. Backwash controller unit. Two 1" continuous air release valves. Three stainless steel glicerine manometers....

    1 654,62 € 2 398,00 € -31%
    Reduced price!
  • Available

    Dual chamber sand media filter DN80 3" in galvanized steel with automatic backwash: Max pressure: 18 bar. Water flow: 30-60 m3/h. Total sand: 275Kg, 1-2mm sand Backwash kit included with: Galvanized backwash collector. Two three-way backwash valves. Backwash controller unit. Two 1" continuous air release valves. 3 stainless steel glicerine manometers....

    2 029,11 € 2 830,00 € -28.3%
    Reduced price!
  • In stock

    Dual chamber sand media filter 1"1/2 F-F in galvanized steel with manual backwash: Max pressure: 18 bar Water flow: 5-11 m3/h Total sand: 75Kg, 1 - 2mm sand Manual backwash kit included with: Galvanized backwash collector. Four 1" ball valves. Two 1" continuous air release valves. Three glicerine manometer with stainless steel case. Bolts. Quartzite sand...

    731,52 € 1 016,00 € -28%
    Reduced price!
  • Available

    Dual chamber sand media filter 2" F-F in galvanized steel with manual backwash. Max pressure: 18 bar. Water flow: 10-30 m3/h. Total sand: 125Kg, 1 - 2mm sand. Manual backwash kit included with: Galvanized backwash collector. 4 brass gate valves. 2 counter flanges. Two 1" continuous air release valves. Three stainless steel glicerine manometers. Bolts....

    994,56 € 1 344,00 € -26%
    Reduced price!
  • Available

    Dual chamber sand media filter 2" F in galvanized steel with automatic backwash: Max pressure: 18 bar. Water flow: 30-60 m3/h. Total sand: 275Kg, 1-2mm sand. Manual backwash kit included with: Galvanized backwash collector. 4 brass gate valves. 2 counter flanges. Two 1" continuous air release valves. Three stainless steel glicerine manometers. Bolts. Sand...

    1 354,94 € 1 831,00 € -26%
    Reduced price!
  • In stock

    Dual chamber sand media filter DN100 (4") in galvanized steel with manual backwash: Max pressure: 18 bar. Water flow: 40-80 m3/h. Total sand: 400Kg, 1-2mm sand Manual backwash kit included with: Galvanized backwash collector. 2 brass gate valves. 2 wafer valves Two 1" continuous air release valves. Three stainless steel glicerine manometers. Bolts....

    1 671,70 € 2 290,00 € -27%
    Reduced price!
  • Available

    Dual chamber sand media filter DN125 (5") in galvanized steel with manual backwash: Max pressure: 18 bar Water flow: 70-110 m3/h. Total sand: 625Kg, 1-2mm sand Manual Backwash kit included with: Galvanized backwash collector. Two brass gate valves. Two wafer valves Two 1" continuous air release valves. Three stainless steel glicerine manometers. Bolts....

    2 152,80 € 2 990,00 € -28%
    Reduced price!
  • In Stock

    The screen filter is typically used as a safety filter on water systems. It is usually installed after hydrocyclones to removes all small organic particles (300 to 100 micron). Water flow: 12,6 m³/h ; 3,5 lt/sec Filtering area: 858 cm² Pressure: max 8 bar Threads: 1"1/2 male Reliable and long lasting hot galvanized steel body

    164,07 € 191,00 € -14.1%
    Reduced price!
  • In Stock

    The screen filter is typically used as a safety filter on water systems. It is usually installed after hydrocyclones to removes all small organic particles (300 to 100 micron). Water flow: 18 m³/h ; 5 lt/sec Filtering area: 858 cm² Pressure: max 8 bar Threads: 2" male Reliable and long lasting hot galvanized steel body

    168,29 € 196,00 € -14.14%
    Reduced price!
  • In Stock

    The screen filter is typically used as a safety filter on water systems. It is usually installed after hydrocyclones to removes all small organic particles (300 to 100 micron). Water flow: 18 m³/h ; 5 lt/sec Filtering area: 1650 cm² Pressure: max 8 bar Threads: 2" male Reliable and long lasting hot galvanized steel body

    188,12 € 219,00 € -14.1%
    Reduced price!
  • In Stock

    The screen filter is typically used as a safety filter on water systems. It is usually installed after hydrocyclones to removes all small organic particles (300 to 100 micron). Water flow: 36 m³/h ; 10 lt/sec Filtering area: 1650 cm² Pressure: max 8 bar Inlets: 3" spherical Reliable and long lasting hot galvanized steel body

    171,36 € 215,00 € -20.3%
    Reduced price!
  • In Stock

    The screen filter is typically used as a safety filter on water systems. It is usually installed after hydrocyclones to removes all small organic particles (300 to 100 micron). Water flow: 72 m³/h ; 20 lt/sec Filtering area: 1650 cm² Pressure: max 8 bar Inlets: 3" spherical Reliable and long lasting hot galvanized steel body

    201,01 € 272,00 € -26.1%
    Reduced price!